Quality Control/Level II NDE (VT, PT)
Position: Quality Control / Level II NDE (VT, PT)
Place of Work: Orrvilon Manufacturing Division in Orrville, OH
Specific Areas of Responsibility: Perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. Perform NDE Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication. Familiar with the tools and equipment and shall have demonstrated proficiency in their use. Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Capable of assisting production in the set-up of material and/or components for receipt inspection, as required.
Minimum Technical Requirements:
- Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart.
- Inspection personnel performing work on elevated surfaces shall be capable of wearing the required fall protection equipment.
- Inspection personnel shall be physically capable of crawling in and out of small manways, climb inside vessels, towers, heaters, or other confined spaces for inspection activities, often wearing Self Contained Breathing Apparatus (SCBA) as required to comply with safety regulations. Any fear of closeness (claustrophobia) should be identified.
- Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds
- Will work in various areas of the plant location. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet and noisy.
- May work alone with minimal supervision or with other personnel.
- Inspection personnel shall possess fundamental written and verbal communication skills.
- Inspection personnel shall be fluent (written and verbal) in the English language.
- Computer skills to include MS Office applications.
Desirable Qualifications: High School diploma or equivalent with at least three years of inspection related experience. Two years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school. One year of inspection related experience with a degree in engineering or science from a university or accredited college. Qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized: Visual Examination (VT), Liquid Penetrant (PT). Certified Level II Visual Examination (VT) and Liquid Penetrant (PT). Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience
As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.