(GTAW) Gas Tungsten Arc Welder

Camden, NJ
Full Time
Holtec International
Mid Level

Position Summary:

The Welder must be qualified on multiple weld processes to include GTAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment.

 

Essential Job Responsibilities/Duties:

  • Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work.
  • Prepare materials for welding, fit the components, and perform welding process per drawing specification.
  • Weld components in all positions consistent with quality requirements.
  • Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. 
  • Work from drawings, work orders, supervisor’s instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols.
  • Monitor the fitting, burning, and welding process to avoid overheating of parts.
  • Use tools of measurement for checking dimensions of parts, work to tolerances.
  • Visually examine welds for quality.
  • Operate hand and power tools common to the welding trade.
  • Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment.
  • Maintain work area in safe, clean, and orderly condition. 
  • Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding.

 

Physical Demands & Abilities:

  • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.
  • While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion.  The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas.
  • This role can be physically demanding and may require the ability to lift up to fifty (50) pounds.

 

Minimum and Preferred Qualifications:

  • High school degree or equivalent required.
  • Ability to perform multiple weld processes including FCAW and submerged arc that pass visual examination and x-ray testing.  (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.)
  • Ability to read blueprints and transfer blueprint information to material.
  • Minimum of 2-4 years welding in heavy plate manufacturing required.
  • **MUST pass 2G and 3G GTAW weld tests

 

NOTE:  This job description is not intended to be all-inclusive. Employee may perform other related duties as assigned.

Share

Apply for this position

Required*
Apply with Indeed
We've received your resume. Click here to update it.
Attach resume as .pdf, .doc, .docx, .odt, .txt, or .rtf (limit 5MB) or Paste resume

Paste your resume here or Attach resume file

To comply with government Equal Employment Opportunity and/or Affirmative Action reporting regulations, we are requesting (but NOT requiring) that you enter this personal data. This information will not be used in connection with any employment decisions, and will be used solely as permitted by state and federal law. Your voluntary cooperation would be appreciated. Learn more.

Invitation for Job Applicants to Self-Identify as a U.S. Veteran
  • A “disabled veteran” is one of the following:
    • a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or
    • a person who was discharged or released from active duty because of a service-connected disability.
  • A “recently separated veteran” means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.
  • An “active duty wartime or campaign badge veteran” means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.
  • An “Armed forces service medal veteran” means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.
Veteran status



Voluntary Self-Identification of Disability
Voluntary Self-Identification of Disability Form CC-305
OMB Control Number 1250-0005
Expires 04/30/2026
Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Please check one of the boxes below:

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

You must enter your name and date
Human Check*